Icom IC-746 100watts on 2m


Equipment Details

Good Condition

Tested OK

Shipping £12.00 UK Mainland

Arriving next week –

Second Hand Icom IC-746 HF/6m Transceiver 1

Second Hand Icom IC-746 HF/6m Transceiver,The ICOM IC-746 covers 160-10 meters plus 6 and 2 meters. 100 Watts of output is available on all bands – HF, 50 MHz and 144 MHz, making the IC-746 a practical choice for all-around base station use. The die-cast aluminum chassis and a large cooling fan help to stabilize the PA circuit, providing 100% full duty cycle operation. It has 100 alphanumeric memories, spectrum display, Twin PBT, CTCSS encode/decode, APF, two stage preamp, automatic antenna tuner and electronic keyer. DSP digitally transposes receive audio components in all modes of operation to produce desired AF frequency characteristics at the IF stage of the transceiver. This built-in DSP provides: noise reduction, automatic notch filter and selectable APF. The digital bar graph meter displays ALC, power output and SWR simultaneously! The radio automatically selects from the three separate antenna inputs (HF, 6 meters, 2 meters). A built-in automatic antenna tuner operates on the HF bands plus 6 meters. The 746 requires 12 VDC at 20 amps.

Spectrum Scope
102 Memories
Noise Blanker
VOX Function
Selectable APF
Dual Display
100 Watt Output
40 Watt Output (AM)
Built-in Automatic Antenna Tuner 180-6 Meters
Full Break-In CW
CW Keyer
100% Duty Cycle
Rx Antenna Jack
DSP Notch
1 Hz Readout
Memory Keyer
RF Attenuator 6/12/18 dB

Frequency Coverage:
Receive: 0.030 – 60.000 MHz, 144-146
1.800 – 1.999 MHz
3.500 – 3.999 MHz
7.000 – 7.300 MHz
10.100 – 10.150 MHz
14.000 – 14.350 MHz
18.068 – 18.168 MHz
21.000 – 21.450 MHz
24.890 – 24.990 MHz
28.000 – 29.700 MHz
50.000 – 54.000 MHz
144.000 – 146.000 MHz

Number of Memory Channels: 102 (99 regular, 2 scan edges and 1 call)
Antenna Connector: SO-239×3 [2 for HF + 1 for 144 MHz bands; 50Ω ]
Usable Temperature Range: -10°C to +60°C; +14°F to +140°F
Frequency Stability: Less than ±7 ppm from 1 min. to 60 min. after power ON. After that, the rate of stability change is less than ±1 ppm at +25°C; +77°F. Temperature fluctuations 0 °C to +50°C (+32°F to + 122°F) less than ±5 ppm.
Power Supply Requirement: 13.8 V DC (±15% negative ground)
Current Drain (at 13.8 V DC): Transmit max. power: 20A
Receive standby: 2.5A
max. audio: 2.7A
Dimensions (approx): 287(W) x 120(H) x 316.5(D) mm, (projections not included)
Weight (approx): 8.9 kg;


Contact us regarding this equipment




Send g3rcq a message about this item:

Back to Top

Website Design by Verulam